TheGodHand Drill BitFlat Blade Setincludes x5 drill blades with diameters of 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm and 3.0 mm.

Its entire shaft is cylindrical, with a flat-blade edge. Both sides of the blade are usable as a flat blade, but the tilt angle for easy carving will differ depending on which side is up. A unified 3 mm shaft enables easy replacement without changing the collet chuck of the pin vise body.

These high-precision chisel blades improve modelling quality and work efficiency by using different blade widths. Capable of sculpting erasers, wood, plastic, putty, resin and stones for seal engraving.

*Please take extra caution when handling the blades, especially when opening the storage case or during use.

Difference from Spin Blade:

• [Spin Blade]is also a flat blade but differs from[Bit Blade]in the blade shape.[Spin Blade]is thin and symmetrical, enabling ease of drilling.
• [Flat Bit Blade]is a blade with an oblique side and a vertical side on the other. Since[Flat Bit Blade]is not symmetrical, it is not the best for drilling, but the thicker oblique part is more durable than[Spin Blade].
• In the case of push-cutting plastic boards, the cut with[Spin Blade]is like a double-edged knife, and that with[Flat Bit Blade]is like a single-edged knife.

Quality Indication:

• Material: Special cutlery steel (with case)
• Hole diameter: 1.0 mm, 1.5 mm, 2.0 mm, 2.5 mm, 3.0 mm
• Case: PP
• Shaft thickness: 3 mm
• Made in Japan